Submitted by webmaster on 19 May 2024

Vetonit Pool Fix

Polymer-modified, water-resistant adhesive for fixing tiles in swimming pools, fountains, and water tanks.

Pool Fix is a deformable cementitious adhesive with improved characteristics, slip resistance, and extended open time. It is composed of hydraulic binders, selected aggregates, and special additives. And is supplied as a dry powder in pre-weighed bags ready to use on-site; requiring only the addition of clean water to produce an easily workable mortar. Pool Fix is suitable for making a dry-set fixing mortar, particularly for pool ceramic walls and floor tiles. Pool Fix is applied at a thickness of 3 - 10 mm, depending on the tiles’ type and the substrate’s quality.

Uses

  • Can be used with all types of submerged tiles in swimming pools, fountains, and water tanks.
  • Tiling on wall surfaces plastered with Saveto products.
  • Tiling on wall surfaces plastered with water-resistant plasters such as Vetonit Render & Vetonit Base WR on damp concrete interiors.
  • Suitable for dry & wet conditions.

Advantages

  • Factory-controlled pre-blend ensures consistently high quality.
  • Requires only the addition of water on-site at the time of use.
  • Superior adhesion in wet & water-immersed conditions.
  • Easy tile installation that enables high productivity.
  • Superior workability.
  • Excellent slip resistance.
  • Excellent adhesion on a variety of tiles available in the local market.
  • Suitable for internal & external applications.
  • Suitable for horizontal & vertical surfaces

Usage Instructions

The surface should be sound, clean, and free from loose material, grease, laitance, dirt, curing compound, etc. 

Wet all surfaces with clean water before the application of Pool Fix. The surface should appear damp with no water pooling.

To prepare mortar adhesive, pour 7.5 – 8.5 litres of water into a container. Add 25 Kg of the powder and mix with a low-speed electric drill fitted with a suitable paddle until a uniform, lump-free consistency is achieved.

Allow the mixed material to stand for about 10 minutes and remix briefly without adding further water.

You can blend Pool Fix manually for small quantities, however, you must maintain the correct ratio of powder to water. Do not add water to the mixture once the mortar adhesive begins to harden.

Spread the mixed mortar adhesive, and firmly press it onto the surface that will be tiled; work with a notched trowel. Spread the mortar adhesive on an area that can be tiled within 10 - 15 minutes. Press the tiles firmly over the mortar adhesive and immediately knock them into the desired position. Adjust the position of the tiles, if required, within the recommended adjustability time of 10 - 15 minutes after installation.

Leave installed tiles undisturbed for at least 48 hours. The mortar adhesive must not rise between the tile joints higher than half the thickness of the tiles. It is recommended to use Vetonit Tile Grout to fill the joint gaps after 2 days of tile installation.

For further information regarding the suitable substrates and tiles on which this product can be safely applied, please contact Saveto’s technical department.

Clean tools and equipment with water immediately after use. Remove the hardened material using mechanical means.

Downloads

Explore More Products

Ceramic Tile Fix

Cementitious adhesive with slip resistance.

Tiling

Pool Grout

Cement Tile Grout for Pools.

Tiling

Porcelain Plus

Adhesive for large porcelain tile slabs.

Tiling