Vetofix SA402 is a single-component, solvent-based contact adhesive with strong adhesion properties on all normally occurring substrates and to be used for bonding PVC waterproofing membranes to concrete, cement plaster and metal sheets, where required.
The substrate should be sound, clean, and free from loose material, grease, laitance, dirt, or any other substance that might impair the product’s bond quality with the substrate.
Brush, roller or trowel.
Apply the adhesive uniformly on the substrate using a fine trowel, brush or roller. Allow the adhesive to set for approx. 15 - 20 minutes to become tacky then place the following material. Clean any excess with water immediately.
Vetofix SA402 should be removed from tools and equipment with Vetonit Solvent XX400 immediately after use. Hardened material can only be removed mechanically.