ڤيتونيت ترويبة بيور

Tile adhesive thickness should not exceed half the thickness of the tile pieces. Excess mortar should be removed. 

All the joints should be free from dust, loose materials and traces of foreign materials, etc. Neutralise the tiles’ water absorption by applying clean water. Do not let water pool in the joints.

To prepare Vetonit Grout Pure mortar, pour 0.6 - 0.8 litres of water into a container then add 2 kg of Saveto Grout Pure powder and mix manually or with a low-speed electric drill fitted with a suitable paddle for 3 - 4 minutes until a uniform, lump-free consistency is achieved. 

Allow the mixed material to stand for about 5 minutes and remix briefly without adding water. Do not add water to the mix once the grout paste begins to harden.

Spread the mixed mortar over the tile joints and firmly press with a rubbing pad covered with a sponge or rubber spatula. Spread the Grout mortar diagonally across the joints, ensuring pressing the grout firmly into the joints.

Remove excess grout on tiles using the same tool. 

After the initial setting of 10 - 20 minutes, and depending upon the ambient temperature and humidity, clean the tiles and remove all excess material with a wet sponge. After full drying, clean the tile surfaces with a dry cloth or disposable cotton towels. When washing and drying the tiles, avoid rubbing the tile joints too deep.

For further information regarding the suitable substrates and tiles on which this product can be safely applied, please contact Saveto’s technical department.

Clean tools and equipment with water immediately after use. Remove the hardened material using mechanical means.