All new concrete surfaces must be cured at least for 28 days prior to application of the primer.

For previously painted surfaces remove old paint completely. The substrate should have sufficient strength and free from unsounded areas, pug holes, protrusions, and pops.

Make sure that the surface is clean, dry, free from dust, oil, grease, salt, mold and all forms of release agents /curing agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust/loose particles must be removed before application.

Stir well before use with a flat paddle to a homogenous consistency. Stir occasionally during use. Additives are not permitted. Close container when not in use.

Apply 1-2 coats of Vetoprime Décor at a thickness of 100-200 microns thickness using a roller, brush, or spray, and allow it to dry completely.

Remove Vetoprime Décor product from tools, equipment, and mixers with clean water before the initial set. Cured material can only be removed mechanically.