Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants. After the cleaning process, a physical or chemical pretreatment might be required, depending on surface and type of material. The type of pretreatment must be determined by tests. 

New concrete floors should be at least 28 days old, with a moisture content of less than 4%. If earlier application is required, the substrate should be tested for moisture conditions.

Mix the base [Part-A] and hardener [Part-B] components of Vetofix UA452 thoroughly using a heavy-duty slow speed drill-paddle assembly for two to three minutes and ensure a homogenous mix.

Properly mixed materials should be spread or filled over the cleaned surface using a suitable tool as per requirement demands on the entire area without leaving any gaps.

Clean tools with Vetonit Solvent XX400 promptly before material harden. Cured material must be mechanically removed.