الترويبة الناعمة

Tile adhesive thickness should not exceed half the thickness of the tile pieces. Excess mortar should be removed. All the joints should be free from dust, loose materials & traces of foreign materials, etc. Neutralise the tiles’ water absorption by applying clean potable water. Do not let water pool in the joints.

Pour 6.5–7.5 liters of fresh, clean water into a suitably sized mixing vessel. Slowly add 20 kg of Grout Fine while mixing with a mixer fitted with a suitable paddle. Continue mixing until a uniform, lump-free consistency is achieved.

Important Notes: Do not mix partial quantities unless an exact proportion based on volume can be achieved using proper measuring tools. Use the mixed material within 1 hour. Do not add water to the mixture once the mortar grout begins to harden.

Apply Vetonit Grout Fine using either a rubber blade, a grouting trowel, a rubber spatula, or a sponge. Spread the mixed grout diagonally across the tile joints and firmly press it with a rubbing pad covered with a sponge or a rubber spatula to ensure filling all the gaps. Remove excess grout on tiles using the same tool. After 15 - 30 minutes, the grout should be initially dry, depending on the ambient temperature & humidity. Clean the tiles and remove all excess material with a damp sponge. After full drying, clean the surface of the tiles with a dry cloth or disposable cotton towels. When washing & drying the tiles, avoid rubbing the tile joints too deep. Moist the grout from time to time for the first 2 days after applying the mortar to ensure optimal hardening.

For further information regarding the suitable substrates and tiles on which this product can be safely applied, please contact Saveto’s technical department.

Clean tools and equipment with water immediately after use. Hardened materials will require removal by mechanical means.