Submitted by webmaster on 5 August 2025

Vetofix PA400

High-performance, fast-setting polyester adhesive and putty for stone and marble.

Vetofix PA400 is a two-component, high-performance, polyester-based adhesive and putty, specially designed for bonding natural stones to each other, as well as to a variety of other surfaces. When mixed with a hardener, it creates an easily workable, fast-setting mortar ideal for the permanent installation and repair of natural stone, for both indoors and outdoors applications.

Uses

  • Bonding of natural stones such as marble, granite, travertine, and limestone to surfaces like concrete.
  • Stone-to-stone bonding such as marble, granite etc.
  • Fast-setting adhesive to secure indoor and outdoor stone installations on both horizontal and vertical surfaces.
  • Effective for repairing chips, cracks, or damages on natural stones.

Advantages

  • Exceptional bond strength on various stone types.
  • Rapid curing time.
  • Excellent workability.
  • High compressive strength.
  • Easy to apply.

Usage Instructions

The substrate should be sound, clean, and free from loose material, grease, laitance, dirt, or any other substance that might impair the product’s bond quality with the substrate. Make use of a broom or vacuum cleaner to clear off any coarse dirt, or surface residues such as dust or debris. 

Note: Before applying the product, it is necessary taking a preliminary test to evaluate the suitability of the product on an unexposed area or unused piece of material.

Vetofix PA400 is supplied as two component pre-pack of a resin base and a hardener. To ensure proper mixing, stir the base (component A) and the hardener (component B) individually to disperse any setting material.

It is recommended to mix the two components in small quantities for direct use, to minimize waste. Mix 100g of resin (Part A) with 2-3g of hardener (Part B) until fully blended. Join the surfaces within 3-4 minutes of application. Avoid using excess hardener, as it can impact the working time of the product. Prevent movement of assembled parts until fully cured.

Clean uncured material with Vetonit Solvent XX400.

  • Do not apply the product on wet or heated surfaces.
  • Before applying to newly laid or grouted surfaces, ensure that the adhesive or grout has fully cured.
  • This product should not be used in conjunction with other chemicals.

Downloads

Explore More Products

Vetofill CG551

Polymer modified hygienic cementitious tile grout for hospitals & clinics.

Tiling

Ceramic Tile Fix

Cementitious adhesive with slip resistance.

Tiling

Vetonit Ultra

A polymer-modified, weather-resistant, multipurpose tile adhesive.

Tiling