Ceramic Tile Fix is a normal cementitious adhesive with slip resistance (as per ISO-13007-1 class C1T description). It is composed of hydraulic binders, selected aggregates, and special additives. It is supplied as a dry powder in preweighed bags ready to use on-site, requiring only the addition of clean water to produce an easily workable mortar. Ceramic Tile Fix is ideal for fixing ceramic and terrazzo tiles and should be applied at a thickness of 3 - 10 mm, depending on the type of tiles and the quality of the substrate.
Uses
Tiling on smooth concrete surfaces, lightweight bricks, blocks, and plasterboards.
Tiling on wall surfaces plastered with Saveto products.
Suitable for dry & wet conditions.
Advantages
Factory-controlled pre-blend ensures consistently high quality.
Requires only the addition of water on-site at the time of usage.
Easy tile installation that enables high productivity.
Superior workability.
Excellent slip resistance.
Excellent adhesion on a variety of tiles available in the local market.
The substrate should be sound, clean, and free from loose material, oil, grease, laitance, dirt, curing compound, etc. Wet all surfaces with clean water before applying Ceramic Tile Fix. The surface should appear damp with no water pooling.
To prepare the mortar adhesive, pour 4.2-4.8 litres of water for 20 kg bag, 5.25-6 liters for 25 kg bag, 6.3-7.2 liters for 30 kg bag into a container then add powder. Mix using a low- speed electric drill fitted with a suitable paddle until a uniform, lumpfree consistency is achieved. Allow the mixed material to stand for about 10 minutes and remix briefly without adding further water
Spread the mixed mortar adhesive using a notched trowel then firmly press it onto the surface. Spread the mortar adhesive to an area that can be tiled within 10 - 15 minutes. Press the tiles firmly over the mortar adhesive and immediately knock them into the desired position. Adjust the position of the tiles, if required, within the recommended adjustability time of 10 - 15 minutes after installation. Leave installed tiles undisturbed for at least 48 hours. The mortar adhesive must not rise between the tile joints higher than half of the thickness of the tiles. It is recommended to use Vetonit Tile Grout to fill the joint gaps after 2 days of tile installation. For further information regarding the suitable substrates and tiles on which this product can be safely applied, please contact Saveto’s technical department.
