Vetoproof Geotex is a wide range of geotextile fabric that can be used as reinforcement for wide variety of applications or protection for waterproofing membranes. Vetoproof Geotex is produced in nine grades Each grade has a unique property that when applied or used with other suitable Saveto waterproofing products, gives the required results and protection for the waterproofing membrane against back filing or concrete works
All surfaces where the Vetoproof Geotex is to be applied must be well compacted, smooth, and free from projections. When otherwise necessary, it is highly advised to use compressed air or a wire brush in order to remove further dirt, or other inconsistencies in case it is applied on concrete surfaces
For waterproofing protection of substructures, roofing, watertanks bridges, roads & infrastructure works. Immediately lay Vetoproof Geotex along the surface. Make sure to apply the fabric completely by gently rolling. When joining the Vetoproof Geotex geotextile together, be sure to keep an overlap of at least 5 to 10 cm.
Vetoproof Geotex is available in different grades. Refer to the technical properties tables provided below. When Vetoproof Geotex is to be used in conjunction with other Saveto products, make sure to follow the recommended method of application for each product by referring always to the Technical Data Sheet.