Cement-based rough putty for leveling and surface repair.
SAVETO Rough Putty is a high quality premixed rough putty to be used internally and externally as a base, leveling and repairing coat prior to the painting & coating applications on all concrete surfaces, fair face concrete, plaster, ceilings and gypsum boards.
Usage Instructions
Remove dust, oil, grease, loose materials & paints which may affect adhesion with the substrate.
Moisten the surface with clean water before application.
Put 8 - 9 liters of clean water in a suitable pot + ( 0.5 -1.0 liter) of SAVETO Bond Pure, then add one bag of SAVETO Rough Putty gradually and mix for 3 minutes using a mechanical mixer till the mixture is uniform and free of lumps.
Let the composition stands for about 10 minutes and mix again.
The product now is ready for application either manually, or by spraying machine. The putty must be cured by water spray once every 12 hours for minimum next 24 hours.
If the mortar in the pot starts to harden, do not add extra water; just remix till it turns back to the desired consistency.
Advantages
High quality control system for raw material selection and testing products.
Exact mixing ratios (scales and weighing process) with controlled mixing method.
Economic, fast and easy to use (mix & apply), only addition of water is required.
Excellent bonding, crack free, high resistance to water and extreme weather conditions.
It is suitable for dry and wet areas, internally & externally.
Mix is applied either manually, or by spraying machine.
Highly recommended prior most types of paintings and coatings.
Highly recommended in coastal area, due to its pureness & freeness of salts.
