Saveto Crack Filler

Submitted by webmaster on 10 July 2025

Remove dust, oil, grease, loose materials & paints which may affect adhesion with the substrate.
Moisten the surface with clean water before application.
Put 8 - 9 liters of clean water in a suitable pot, then add one bag of SAVETO Crack Filler gradually and mix for 3 minutes using a mechanical mixer till the mixture is uniform and free of lumps.
Let the composition stand for about 10 minutes and mix again.
The product now is ready for application by pressing it inside the crack in a diagonal direction using any flat metal or plastic tool.
For cracks more than 3 mm (wide cracks), add 1.0 liter of SAVETO Bond to the water when mixing and use joint tape after filling the crack.
The plaster must be cured by water spray once every 12 hours for minimum next 24 hours.
If the mortar in the pot starts to harden, do not add extra water; just remix till it turns back to the desired consistency.

High quality control system for raw material selection and testing products.
Exact mixing ratios (scales and weighing process) with controlled mixing method.
Economic, fast and easy to use (mix & apply), only addition of water is required.
Excellent bonding, crack free, high resistance to water and extreme weather conditions.
It is suitable for dry and wet areas, internally and externally.
Filling cracks up to 3 mm.
Highly recommended in coastal area, due to its pureness & freeness of salts