Cement-based finishing coat for artificial stone applications.
SAVETO Artificial - Stone is high quality premixed colored finishing coat; to be applied on the prepared plastered surfaces.
Usage Instructions
Remove dust, oil, grease, loose materials & paints which may affect adhesion with the substrate.
Moisten the surface with clean water before application.
Put 10 - 11 liters of clean water in a suitable pot, then add one bag of SAVETO Artificial - Stone gradually and mix for 3 minutes using a mechanical mixer till the mixture is uniform and free of lumps.
Let the composition stands for about 10 minutes and mix again.
Apply the material with trowel and leveling with aluminum bar.
Hammering can be done after 2 – 4 days.
The plaster must be cured by water spray once every 12 hours for minimum next 48 hours.
If the mortar in the pot starts to harden, do not add extra water; just remix till it turns back to the desired consistency.
Advantages
High quality control system for raw material selection and testing products.
Exact mixing ratios (scales and weighing process) with controlled mixing method.
Economic, fast and easy to use (mix & apply), only addition of water is required.
Excellent bonding, crack free, high resistance to water and extreme weather conditions.
Highly recommended in coastal area, due to its pureness and freeness of salts.
Mix is applied manually (trowel).
Stable colors against sun light & U.V.
It is suitable for dry and wet areas, internally and externally.
