Cement-based grooved finishing coat for decorative surfaces.
SAVIATTO is a high quality premixed colored finishing coat; to be applied on the plastered surfaces to give a final grooved coat.
Usage Instructions
Remove dust, oil, grease, loose materials & paints which may affect adhesion with the substrate.
Moisten the surface with clean water before application.
Put 9 - 11 liters of clean water in a suitable pot, and then add one bag of SAVIATTO gradually and mix for 3 minutes using a mechanical mixer till the mixture is uniform and free of lumps.
Let the composition stands for about 10 minutes and mix again.
The product now is ready for application either manually (trowel) on vertical or horizontal sequences.
The Render must be cured by water spray once every 12 hours for minimum next 48 hours.
If the mortar in the pot starts to harden, do not add extra water; just remix till it turns back to the desired consistency.
Advantages
High quality control system for raw material selection and testing products.
Exact mixing ratios (scales and weighing process) with controlled mixing method.
Economic, fast and easy to use (mix & apply), only addition of water is required.
Excellent bonding, crack free, high resistance to water and extreme weather conditions.
Highly recommended in coastal area, due to its pureness and freeness of salts.
Mix is applied manually (trowel).
Stable colors against sun light & U.V.
It is suitable for dry and wet areas, internally and externally.
