Saveto Sand & Cement

Submitted by webmaster on 10 July 2025

Remove dust, oil, grease, loose materials & paints which may affect adhesion with the substrate.
Moisten the surface with clean water before application.
Put 7 - 9 liters of clean water in a suitable pot, then add one bag of SAVETO Sand & Cement gradually and mix for 3 minutes using a mechanical mixer till the mixture is uniform and free of lumps.
Let the composition stands for about 10 minutes and mix again.
The product now is ready for application either manually (trowel), or by plastering machine (spraying).
The plaster should be leveled using a straight bar.
The plastered leveled surface should be finished by trowelling till desired smooth surface is achieved.
For application on smooth concrete surfaces; use SAVETO Spatter Dash as a scratch coat prior to application of SAVETO Sand & Cement.
The plaster must be cured by water spray once every 12 hours for minimum next 48 hours.
If the mortar in the pot starts to harden, do not add extra water; just remix till it turns back to the desired consistency.

High quality control system for raw material selection and testing products.
Exact mixing ratios (scales and weighing process) with controlled mixing method.
Economic, fast and easy to use (mix & apply), only addition of water is required.
Excellent bonding, crack free, high resistance to water and extreme weather conditions.
Highly recommended in coastal area, due to its pureness and freeness of salts.
It is suitable for dry and wet areas, internally and externally.
Mix is applied either manually (trowel), or by plastering machine (spraying).
Compatible with most types of paintings and coating.