Submitted by webmaster on 10 July 2025

Saveto Spatter Dash

Scratch primer coat for plastering and finishing colored renders.

SAVETO Spatter Dashis a high quality cement-based water resistant premixed mortar, it can be used as follows:-

SAVETO Spatter Dash (grey) is a high quality scratch coat beneath the plaster on all concrete surfaces and block walls. It acts as a strong layer between the substrate and the plaster.

SAVETO Spatter Dash (color) is a high quality scratch coat used as a final coat on plaster and on all concrete surfaces.

Remove dust, oil, grease, loose materials & paints which may affect adhesion with the substrate.
Moisten the surface with clean water before application.
Put 9 - 10 liters of clean water in a suitable pot, then add one bag of SAVETO Spatter Dash gradually and mix for 3 minutes using a mechanical mixer till the mixture is uniform and free of lumps.
Let the composition stands for about 10 minutes and mix again.
The product now is ready for application either manually or by conventional machine.
For applying on fare face concrete one liter of SAVETO Bond Pure should be added with water to 50 kg bag.
The plaster must be cured by water spray once every 12 hours for minimum next 48 hours.
If the mortar in the pot starts to harden, do not add extra water; just remix till it turns back to the desired consistency.

High quality control system for raw material selection and testing products.
Exact mixing ratios (scales and weighing process) with controlled mixing method.
Economic, fast and easy to use (mix & apply), only addition of water is required.
Excellent bonding, crack free, high resistance to water and extreme weather conditions.
Highly recommended in coastal area, due to its pureness and freeness of salts.
It is suitable for use internally and externally.
Stable colors against sun light & U.V.
Mix is applied either manually or by conventional machine.